All About Valves

Posts Tagged ‘motor’

good stuff and technics to fix and diagnose your engine. with random cattage .

Duration : 0:11:43

Valves.com/oil-valves/technical-info-on-oil-burning-and-head-gaskets/#more-513″ class=”more-link”>Read the rest of this entry »

Disassembly the Datsun L26 Nissan engine by open the cylinder head. You can sea the pistons, camshaft, oil seals and Valves.
Engine failure after new gasket kit with new oil seals.
1,5 l oil in exhaust over 30 miles.
—- new head gasket failure –

©2008 all rights reserved

Duration : 0:4:47

Read the rest of this entry »

honda gx200 go kart proformance engine build big valve head ported and milled 29mm intake valve with new seat 25mm exhaust valve stanless steel valves split keepers and retainers crome moly push rods high flow exhaust 22mm carb uni air filter flat top piston arc billet conrod with bearings gx160 flywheel and 4 degree timming key 18hp+ motor

Duration : 0:9:58

Valves.com/valves/2-gx200-rebuild-top-end-big-valve-head-ported-and-milled-22mm-mikuni-carb-high-flow-exhaust/#more-338″ class=”more-link”>Read the rest of this entry »

http://boxwrench.3dcartstores.com/Basic-Engine-Building-DVD_p_0-8.html
Click here for the “Basic Engine Building” DVD

Basic Engine Building DVD – Chapter 13: Valve Train

The valve train is all of the engine parts, inside the cylinder head, that control the opening and closing of the valves. The camshaft, lifters, pushrods, rocker arms, and valve springs and the valves themselves, all make up the valve train in all motors.

In this section we show the proper way to disassemble and organize the entire system. Gives example of rocker shafts on some motors. A great accessory for this is Goodson tools VTO 80 valve train organizer tray, to keep all your parts together in the right order. Also covers the certain tools you need like a Craftsman pick set, and a lifter extractor tool.

Great shots of our marine engine and the sludge inside it before it went out to the machine shop!

BoxWrench.net is a community and resource designed for automotive enthusiasts. The Basic Engine Building DVD is over three hours of engine building that covers everything from removal and disassembly to final embly and engine start-up. This is the ultimate DVD for any home mechanic or engine enthusiast that wants to see a complete rebuild from Teardown to Start-Up. This video can be used to learn how to work on almost any type of internal combustion engine including V8, V6, Straight 8, in-line 6 and even 4 cylinder engines.All of the interactive features and menus will not work over YouTube.

This video is great for people interested in car repair, car care, and restoration. As well as hot rods, muscle cars, performance parts, and boosting horsepower. It can also help you to gain knowledge for increasing fuel economy, how to lower your emissions, and covers preventative maintenance to avoid little things like overheating.

Get the full DVD with all of the interactive menus, Tools section and engine Glossary terms here…

http://boxwrench.3dcartstores.com/Basic-Engine-Building-DVD_p_0-8.html

Don’t forget our Holley Installation & Tuning DVD. Sample clips on our youtube page and at our store here…

http://boxwrench.3dcartstores.com/Holley-Install-Tuning-DVD_p_14-12.html

3 New Transmission DVDs and a Differential Rebuilding DVD just added.
Click here…

http://boxwrench.3dcartstores.com/DVDs_c_14.html

http://www.boxwrench.net – Educating the Automotive Enthusiast!

Duration : 0:2:36

Valves.com/valves/cylinder-head-valve-train-teardown-video-engine-building-dvd/#more-266″ class=”more-link”>Read the rest of this entry »

a couple of free redneck engine repair methods.

Duration : 0:7:42

Valves.com/valves/how-to-set-cam-timing-and-fix-bent-valves/#more-245″ class=”more-link”>Read the rest of this entry »

a lesson on this emissions device.

Duration : 0:6:54

Valves/how-car-egr-valves-work/#more-177″ class=”more-link”>Read the rest of this entry »